b'Leather Tab- a 3"x1" strip of leather with a small hole at one end.Ring: 1.5 chrome ring with 1.125 side diameter.Usually used with a Leather tabs are sewn into the sleeve of a flag that is going to besnap hook.displayed indoors on a pole.The flag is placed over the pole and the small hole in the leather tab catches on a peg at the top of the pole, thus ensuring that flag will not slide down the pole. LEATHER TABHook and loop tape: Two strips of fabric, one with tiny hooks and one with tiny loops.When the two pieces are pressed together the hooks D-ring: 1.5 metal or plastic D-ring.D-rings are used as an alternative toattach to the loops creating a tight but temporary bond.Hook and loop grommets.A D-ring is sewn into the top and bottom of the sleeve. tape can be used in a flag sleeve for indoor displays or when the flag is to be displayed on different sizes poles.D-RINGWood Toggle:2.5 wooden toggle secured to the flag with a 1/16 nylon rope sewn into the sleeve.Toggles are the default finishing in many European countries and Canada.Nautical flags are also often finished with a wooden toggle.Flags with wooden toggles can be hung on a halyard or hooked to one another.To hang on a halyard, the toggle on the top of the flag is inserted into a loop in the halyard.The distance Snap Hook:3.5x1.5 chrome snap hook with knurl.Usually used withline at the bottom of the flag is knotted to the other end of the halyard.a chrome ring.Used as alternative to grommets or a sleeve for hangingThe flag can then be hoisted into place and the loose end secured to the flags on a halyard.It is a popular finishing for military and USA flags. cleat on the pole. TOGGLESNAP HOOKHoist ag - direction as shownToggle goes into loop of agpole ropeCleat352 When ag ishoisted, securerope around cleatFlagpole rope knotted through loop in agpole'