b'1 (header) with (2) 0.25 brass grommets (chrome) - 1" header with1.5 (header) with (2) 1 plated grommets (gold)- 1.5" header with (2) (2) 1" chrome colored 100% brass grommets.Grommets 0.25" outside1" gold colored plated grommets.Grommets 1" outside diameter and diameter and are placed approximately 2" from top and bottom of theare placed approximately 2" from top and bottom of the header.Header header.Header material should be chosen from the Sleeve/headermaterial should be chosen from the Sleeve/header material chart.material chart.1.5" (header) w\\wood toggle- 1.5" header with a nylon rope sewn 1.5" (header) with (2) 1" brass grommets (gold)- 1.5" header with (2)into the length of the header.The rope extends past the end of the flag 1" gold colored brass grommets.Grommets 1" outside diameter and arewith a 2.5" wooden toggle secured at the end.The length of the rope placed approximately 2" from top and bottom of the header.Headerdepends on the size of the flag.Header material should be chosen from material should be chosen from the Sleeve/header material chart. the Sleeve/header material chart.1.5" (header) with (2) 1" brass grommet (chrome) - 1.5" header with2" (header) with O-ring & snap hook- 2" header with nylon rope sewn (2) 1" chrome colored brass grommets.Grommets 1" outside diameterinto the length of the header.A stainless steel O-ring Is secured to the and are placed approximately 2" from top and bottom of the header. top of the header. The rope extends past the end of the header 24" with Header material should be chosen from the Sleeve/header materiala stainless steel snap hook secured at the end.chart.2.5" (header) with rope, thimbles & 1" brass grommets- 2.5" header 1.5" (header) with (2) 1" brass grommet (black) - 1.5" header with (2)with a nylon rope sewn into the entire length of the header.The rope 1" black colored brass grommets.Grommets 1" outside diameter andcontinues outside the sleeve and wraps around the stainless steel are placed approximately 2" from top and bottom of the header.Headerthimbles. 1" brass grommets are added to sleeve for increased stability.material should be chosen from the Sleeve/header material chart. The number of grommets depends on the size of the flag.Header material should be chosen from the sleeve/header material chart.1.5 header with (2) 1 brass grommets (gold)- 1.5 canvas header sewn onto the left side of a flag with (2) 1 gold brass grommets.Heat welding- Banner edges are folded to create a 0.75 hem. The hem is then heated to melt/weld the vinyl or plastic.The heat welded sleeve 1.5 header with (3) 1 brass grommets (gold)- 1.5 canvas headercreates a strong hem without interrupting the graphics.sewn onto the left side of a flag with (3) 1 gold brass grommets. High resolution printing (1440 DPI)- A higher quality print with 1440 1.5 header with (4) 1 brass grommets (gold)- 1.5 canvas headerDPI.DPI or Dots Per Inch is the measurement of dots of ink places in a sewn onto the left side of a flag with (4) 1 gold brass grommets.line 1-inch long.The higher the DPI, the denser the ink dots are; this can lead to a sharp and more vibrant print.This is a good option for very 1.5" (header) with (2) metal D-rings- 1.5" header with (2) stainless steeldetailed graphics and indoor banners that will be viewed up close.D-rings, (1) at each end.D-rings are an alternative to grommets.Header material should be chosen from the Sleeve/header material chart. Hook & loop tape closure- Hook & loop tape applied to the ends of a sash for easy closure.1.5" (header) with (2) plastic D-rings- 1.5" header with (2) white plastic D-rings, (1) at each end.D-rings are an alternative to grommets.Header material should be chosen from the Sleeve/header material chart.Imprint size 22x33- Available imprint size for front panel printed tableNon-pleated top stripe- Fans traditionally have 3 or more stripes that covers.The imprint is traditionally placed in the center of the front panelare pleated or gathered from the top.A non-pleated top stripe starts theP T I O N S L G E R M I N O O O T Yfor maximum visibility. pleating from the 2nd stripe, leaving the inner most stripe flat making any imprint more visible and readable.Larger print size digital- A digital imprint on the front panel of a table cover that is larger than 22x33.The digital print does not limit colors orOther color cord- A colored cord (besides black) for drawstring design. backpacks.There are 16 colors are available to choose from.Larger print size screen- A silk screened imprint on the front panel of aOther qty streamers- Adding additional streamers to a standard table cover that is larger than 22x33.Silk Screen images are limited towindsock. Each additional streamer will decrease the width of each 2 colors. streamer.The total width of all the streamers cannot exceed 17.Length & width more than 5- If both sides of the banner are more thanOther stock color-A blank banner that is a color other than white.5, there is an additional upcharge.Banner material is 5 wide so if bothThere are 16 color to choose from.Can be decorated with heat transfer sides are more than 5, there will be at least one seam. vinyl, silk screen or paint.Mini rope & tassels to match fringe- Thin 2 ply string with 1 tasselsPatch for non-tangle rod- Reinforced grommet located on the bottom on each end, used on mini podium banners.The string with tassels areedge of the flag.The grommet is reinforced with a 2x2 canvas square available in several colors and by default, the string will match the fringeon both sides of the flag.The reinforced grommet can be used for a non-used on the banner. tangle rod or a rope tie.3x5- 5x8 flags need one reinforced grommet because the 30 and 48 rods have 1 stainless steel flag attachment.Mini string to match fringe- Thin 2 ply string used on mini podiumLarger flags 6x10-8x12 need 3 reinforced grommets for the 72 and banner.The string is attached to the top of the flag and used for84 rods which have 3 attachments.A single reinforced grommet in the hanging.The string is available in several colors and by default the stringbottom corner is available by request for rope tie downs.will match the fringe used on the banner.Pennant- A triangle shaped flag or banner.The pennant may have 2 Mini string, tassel & suction cup (car mirror)- Thin 2 ply string with 1equal sides like an isosceles triangle or have a flat bottom like a right tassels on each end, used on mini podium banners or car mirror banners. triangle.A suction cup is attached to the center of the hanging string.The string with tassels are available in several colors and by default, the string willPointed- The end of a sash that is cut into one point. 361match the fringe used on the banner.Pole w/ hanging rope- The top edge of a podium banner is finished No header- Felt pennants without the additional header added to thewith a sleeve and an appropriate sized pole.Pole size is based on the left hand side of the pennant. size of the podium banner.A gold hanging rope is attached to the pole for easy display.Other color hanging ropes are available upon request.Non-furl tube- Optional finishing for a golf flag.The non-furl tube allows the flag to rotate on the golf pin without getting wrapped around1 pole sleeve closed on top- A 1 sleeve closed on top of a felt the pole.The hollow, white PVC tube is sewn into the sleeve of the golfpennant, will fit up to a 0.5 pole (diameter).flag.The cap on the top of the tube has a small hole that allows the tube to be placed on top of the golf pin, secured in place but still able to rotate freely.'