b'Streamer swallowtail - The end of the streamers for the standardWavy streamers- Streamers on a windsock that are cut into a wave windsock are die cut into a swallowtail shape. shape to give the windsock interest and movement.10,000 stitches - Embroidery designs are defined by the number ofWeighted bottom sleeve- The sleeve at the bottom of a flag or banner colors and the number of stitches it takes to complete the design. that is weighted either with a pole or rice.Weighted sleeves help the 10,000 stitches are the average stitch count for a 2x3 design and isbanner keep its shape and prevent furling, especially popular when a included in the price of the cap. banner is displayed in breezy or windy areas.Swivel clip & colors strings - 3 thin colored nylon strings, loop through2" weighted bottom sleeve- A 2 sleeve made of the same material as the top of the windsock and connected on top with a 1.5 swivel clip. the flag or banner. The sleeve at the bottom of a flag or banner that is The swivel ring will allow the windsock to twist in the wind without theweighted either with a pole or rice.Weighted sleeves help the banner strings getting tangled. keep its shape and prevent furling, especially popular when a banner is displayed in breezy or windy areas.Swivel clip & white strings - A 2 silver aluminum swivel clip that is attached to a windsock with 3 thin white nylon strings. Swivel ring makes3 white canvas sleeve closed on top- 3 white canvas sleeve, sewn for each hanging and helps minimize the windsock furling. closed on top.Standard on feather and swooper flags (to fit the honor pole).Tasseled ends - A tassel added to each end of a table runner, mostly used with V ends. White felt- Felt that is white on both sides.Can be decorated with heat transfer vinyl, silk screen or paint.Top Mylar streamer - 1.5 wide Mylar streamer, silver on one side, colored on the other.2 streamers are sewn to the top of the sleeve. White- Vinyl that is white on both sides.Can be decorated with heat Mylar streamers create movement, adding extra attention to the flagtransfer vinyl, silk screen or paint.display.White Duck- A heavy duty plain woven cotton fabric.It is more tightly Type I, class 1- 2" duck with snap hook & ring - 2" white cotton canvaswoven than standard canvas.Our white duck matches mil spec MIL-F-duck with white nylon rope (i.e., distance line) sewn into the header2692H.Duck is also available in natural colors upon request.with 1.5" (outside diameter) brass ring secured to the top of the header (flush).The rope extends 24" past the end of the header with a 3.5" brassWind slits 1ply/Wind slits 2 ply/Wind slits App. C-E- Small half-moon snap hook secured to the end. shaped slits cut into the fabric that allow the wind to pass through the Meets mil spec MIL-F-262H and MIL-DTL-15021B flag or banner.Wind slits are used when a flag is hung in a way that it cannot flutter or on large banners.The wind slits help prevent the wear Type I, class 2- 2"duck with header & 2 grommets - 2" white cottonand tear on the flag or banner.The number and placement of the wind canvas duck header with (1) 0.84" brass grommet at each end of theslits are determined by the graphics, as not to interfere with the artwork.sleeve, approximately 0.5" from each end. Meets mil spec MIL-F-262H Wind slits on 1 ply flags are heat cut.2 ply flags with wind slits will be sewn both on the wind slit and on the flag. Wind slits are most common Type 1, class 2- 2" duck with rope and 2 thimbles - 2" white cotton duckon vinyl banners larger than 12, street banners and large building flags.with white nylon rope (i.e., distance line) sewn into the header.The ropeAppliqued and embroidered flags classes C-E are priced under "App. C-E".extends past the end the header and wraps around a galvanized steelClasses A&B are priced the same as printed flags.thimble at both ends. Meets mil spec MIL-F-262HWindsock sleeve- 1 sleeve around the circumference of the larger end G P T I O N S L T Y R M I N O O O E Type I, class 4- 3" duck with grommets & leather tab - 3" white cottonof the windsock.A flexible white plastic strip is inserted into the sleeve duck sleeve, open at both ends, with (1) 0.84" brass grommet at eachand bent into a circle and clipped into the stiff pole.end of the sleeve, approximately 0.5" from each end. Meets mil spec MIL-F-262H.Type II- 2.75" duck lined with leather tab - 2.75" white cotton duck sleeve with white cotton lining.Sleeve is open at both ends and has a (1) 2.5" leather tab sewn into each side of the sleeve. Meets mil spec MIL-F-262H.Type III, class 1- 0.5" hem with (2) 2.5" tie tapes - 0.5" reinforced hem with double folded 6" nylon ties attached 1" from the bottom and top of the flag. Meets mil spec MIL-F-262HType III, class 2- 1.25" duck with leather tab-1.25" flag material sleeve, open at both ends with a (1) 1.375" leather tab sewn into each end of the sleeve. Meets mil spec MIL-F-262H.UV lamination- A clear cold laminate that is applied to the front or the front and back of banner or poster that protects against UV exposure.UV lamination can help colors from fading and protect against scratching.UV lamination is also available as a clear liquid coating.V ends- The ends of a table runner are cut into a point or V shape.WaterproofA treatment that protects a fabric from absorbing liquids.Especially popular for table covers and table banners.Waterproof canvas- The standard canvas polyester that is treated with 364 a waterproofing solution.The table cover is protected from spills and can easily be whipped down.This option is also available for event tents. Laundering the treated canvas may diminish the waterproof protection.Waterproof oxford cloth- Heavy duty oxford cloth that is treated with a waterproofing solution.An event tent treated with oxford cloth is recommended for outdoor venues like farmers markets and fairs. Laundering the treated oxford cloth may diminish the water proof protection.'